SM96 TERM DATA LOGGER for the SM96, SM99, SM199 Pump Controllers
GENERAL DESCRIPTION
The SM96TERM software can download and store data log information from the SM96, SM99, SM199 pump controllers. It requires a working RS232 port on a PC into which a special infrared receiver is connected. This Infrared device is part of the SM96TERM kit. Modern PC’s will require the additional USB to RS232 adaptor, which is also part of the SM96TERM kit.
To use this application, the operator would first run the program in their PC and look for the green ‘Adaptor Ready’ message which tells the system that the infrared receiver is connected ok. Then the receiver is held to within 500mm of the front of the Pump Controller when the Data Dump button is pressed. The information takes about one-second to transfer.
Data integrity checks confirm the accuracy of the transfer. If there has been any corruption of this transfer, the message ‘Bad Download’ would appear on the PC screen.
A full copy of the data log is then transferred into the program via this non-contact link. The data may then be viewed or saved to the PC hard drive for later interpretation.
Pump activity is recorded in 4-hour blocks which shuffle across and add to the Running Totals. In this way the operator can have a close look at recent events as well as the long-term effectiveness of the pumping system.
The program automatically works out whether the pump controller is a single or dual pump unit and varies the display accordingly.
Customer address data and user comments may be attached to each data dump before saving the information to the hard drive.
Because the data transfer takes place via a non-contact optical link through the clear cover of the pump controller, it is safe for non technical staff to perform the transfer as there is no exposure to dangerous voltages.
ADDITIONAL INFORMATION
A supplementary article is available on how this information may be collated and interpreted for widespread installations of the pumping systems. For example a coastal town may have several hundred SM96 systems fitted to each home for sewage pumping. This data logger program is a valuable resource in learning about the usage and effectiveness and of an entire system.
See ‘Notes on Processing Data collected by the SM96, SM99 & SM199 Controllers’ available for download below:
IMPORTANT: This program will NOT operate under a Windows 7 operating system. ( XP and Vista is ok.)
The SM96TERM KIT consists of:
- The SM96TERM program on a CD
- The Infrared Receiver and RS232 patch cable
- A USB to RS232 adaptor
- Installation and setup instructions.
Click on the links below to download this information
| sm96_term_flyer.pdf |
| notes_on_sm96_sm99_data_processing.pdf |
_________________________________________________________________________________________________________________
PRICING INFORMATION
SM96TERM Data Logger Kit
Qty 1+ $380.00
(last updated January 2014)
_________________________________________________________________________________________________________________
PRICING INFORMATION
- Payment can be made to Alian Electronics via EFT or Pay Pal
- All prices in $AUD and do not include the cost of freight. (Click HERE to view the Freight Information page)
- When buying from within Australia add 10% GST
- (Overseas sales are GST Free, but depending upon local policy, you may need to pay tax/duty for goods to be released by your Customs)
- When buying from within Australia by Pay Pal, add 2.4% for Pay Pal transaction fee.
- When buying from Outside Australia by Pay Pal add 3.6% for Pay Pal transaction and currency conversion fee.
- (When buying from Outside Australia using Telegraphic Transfer ( TT ) the buyer will pay transaction fees with their bank.)
- Transaction details, Freight & other charges will be shown on a Proforma Invoice supplied to you before you pay.
SM96TERM Data Logger Kit
Qty 1+ $380.00
(last updated January 2014)
_________________________________________________________________________________________________________________
