SM345 SOLENOID FLOW CONTROLLER

GENERAL DESCRIPTION
This control module is intended for use with water management systems.  Its basic role is to monitor a level probe in a holding tank for a sign that the water has fallen to a specific threshold.  When this happens, a Solenoid is activated to allow water to flow into the holding tank.   

When the storage tank has reached a higher level defined by a second level probe, the controller responds by deactivating the solenoid.   

A third level sensor may be fitted at a higher level to detect a tank overflow condition, whereupon it would trip a separate Overflow alarm.

The control unit has several presettable options that may be engaged by the installer to suit various field situations.  A Liquid Crystal Display (LCD) can provide additional information about the status and operation of the unit. 

             

• • The controller has a switched 24VAC output via a fuse for activating 24V inlet valves. This is protected by a 1.5A, M205 style fuse.
  • The controller has a 230VAC output that operates at the same time as the 24V output, for driving higher voltage solenoid valves. 
  • A second 240V output will become active during Overflow Alarm conditions. 
  • Each of the three output relays have an associated red ‘status’ led to indicate relay activity.  A single red LED labelled ‘Power’ indicates that mains is connected to the unit.
  • A terminal block provides for up to three level probes relative to a common terminal.   Probes may be simple conductive metal pins placed within the tank enclosure, or commercial (normally open) float-type level switches. (probe signals are intrinsically safe with less than 5V at under 1ma of current flow)
  • An internal Hourmeter & Fill Cycle counter give service staff feedback on tank operation.
  • The Front Panel features two push-button switches. The JOG button will force a 30 second solenoid fill cycle.  The ALARM MUTE button trips a 6-hour Alarm Mute timer which will mute the audible alarm beeper for 6 hours during  overflow Alarm events.
  • A blue 10-position rotary selector switch is present to select one of several views on the display for diagnostic functions.
  • The unit is housed in a gasketed IP66 enclosure 155 x 115 x 80mm.  Where the unit is to be located outdoors, it should be housed in a secondary enclosure to reduce the effects of sunlight, weathering and to limit system access by non-technical staff.  (The alarm Mute feature may be extended to a weatherproof button on the outer enclosure.)
  • All connections (display socket excepted) are via green unplugable screw terminal blocks.  
  • An LED indicator and Alarm Beeper are present to signal overflow alarm conditions.

Click on the link below to download the Operator & Installer Manual.

sm345_manual_v1.pdf
File Size:	862 kb
File Type:	pdf

Download File

---

_________________________________________________________________________________________________________________

PRICING INFORMATION   

• Payment can be made to Alian Electronics via EFT or Pay Pal
• All prices in $AUD and do not include the cost of freight.   (Click HERE to view the Freight Information page)
• When buying from within Australia add 10% GST
• (Overseas sales are GST Free, but depending upon local policy, you may need to pay tax/duty for goods to be released by your Customs)
• When buying from within Australia by Pay Pal, add 2.4% for Pay Pal transaction fee.
• When buying from Outside Australia by Pay Pal add 3.6% for Pay Pal transaction and currency conversion fee.
• (When buying from Outside Australia using Telegraphic Transfer ( TT ) the buyer will pay transaction fees with their bank.)
• Transaction details, Freight & other charges will be shown on a Proforma Invoice supplied to you before you pay.

        SM345  Solenoid Flow Controller
                        Qty 1-9        $327.00
                        Qty 10+       $300.00

          (last updated August 2021) 

_________________________________________________________________________________________________________________